IN7OMM.COM
Search page
Deutsch | Language
7OMM e-News
Rumour Mill
Contact | Volunteers

WHAT'S ON IN 7OMM?
Todd-AO Festival
KRRR! 70mm Seminar
Widescreen Weekend
7OMM Festival
 

7OMM FILM
"Flying Clipper"
"The Hateful Eight"
"The Master"
"Oklahoma!"
"Scent of Mystery"
"2OO1"

IN LARGE FORMAT
Todd-AO
Ultra Panavision 70
Super Panavision 70
Dimension 150
DEFA 70
Sovscope 70
Technirama
IMAX
Showscan
Cinerama
Cinemiracle
70mm Blow-up

NEWS
2016 | 2015 | 2014
2013 | 2012 | 2011
2010 | 2009 | 2008
2007 | 2006 | 2005
2004 | 2003 | 2002

LIBRARY
Interview & People
Cinemas
DP70 / Norelco AAII
70mm Projectors
Rama Galore
Cinerama Remaster
70mm Engagements
SENSURROUND
Stories
Remember

THE 7OMM NEWSLETTER
2005 | 2004 | 2002
2001 | 2000 | 1999
1998 | 1997 | 1996
1995 | 1994 | PDF
 

in70mm.com Mission:
• To record the history of the large format movies and the 70mm cinemas as remembered by the people who worked with the films. Both during making and during running the films in projection rooms and as the audience, looking at the curved screen.
in70mm.com, a unique internet based magazine, with articles about 70mm cinemas, 70mm people, 70mm films, 70mm sound, 70mm film credits, 70mm history and 70mm technology. Readers and fans of 70mm are always welcome to contribute.

Disclaimer | Updates
Support us
Testimonials
Table of Content
 

eXTReMe Tracker
Extracts and longer parts of in70mm.com may be reprinted with the written permission from the editor.
Copyright © 1800 - 2070. All rights reserved.

Visit biografmuseet.dk about Danish cinemas

 

Todd-AO Equipment Catalog, Volume IV
Engineered by American Optical Company, Southbridge, USA
Camera Motors and Controls & Camera Tripods

Read more at
in70mm.com
The 70mm Newsletter
Captions by: Brian O'Brien, Jr. around 1955. Images by: American Optical Company, around 1955. Date: 21.05.2014
Fig. A-294. Todd-AO Variable Speed Motor shown without motor door mounting plate.

Todd-AO Variable Speed Motor (Cat. #10)

Todd-AO Camera Motors

The Todd-AO Camera Motors are of two types: the Variable Speed or "wild" motor and the High Torque Synchronous Motors.

The Variable Speed Camera Motor operates on 110 volts either 60-cycle alternating current or direct current and permits running the camera either forward or reverse at speeds varying from about 8 frames per second up to 32 frames per second.

The Todd-AO High Torque Synchronous Motor is specially designed for the Todd-AO Cameras to pull the heavier 65mm film. It is a salient pole synchronous motor operating on 230 volts, 3-phase alternating current. This motor has an integral sound-proof outer housing and runs very quietly.
 
More in 70mm reading:

Back to Todd-AO Catalog

Todd-AO Birth date
How Todd-AO Began
Todd-AO Home

DP70 / Universal 70-35 / Norelco AAII - The Todd-AO Projector

Internet link:

 
Fig. A-293. Operator's view of the Todd-AO Variable Speed Motor showing camera speed tachometer. The machined boss on the left is for locating motor onto the motor door adapting plate with its couplings.

Todd-AO Variable Speed Motor (Cat. #10)

In order to prevent the high starting torque of the Synchronous Motor from damaging the film, the Soft Start Motor Control Box has been developed. This contains a clock driven timing relay that applies reduced voltage to the motor in two steps and then applies the full line voltage. Thus, the motor starts with a low torque which softly takes up the slack film before the full power is applied. This is completely automatic so that the operative cameraman need do no more than operate a conventional camera cord switch and in approximately three seconds the camera is up to speed. A neon pilot light shows when the line is energized. This Soft Start Control Box may be inserted at any convenient place in the camera power line.
 
 
Fig. A-350. Todd-AO Variable Speed Motor showing the manual camera threading knob. The knurled disc at the bottom of the motor is the speed control adjustment.

Todd-AO Variable Speed Motor (Cat. #10)

When used in conjunction with the Camera Frequency Converter, the Todd-AO High Torque Synchronous Motors will operate the Todd-AO Cameras at a speed of 24 frames per second instead of the Todd-AO standard speed of 30 frames per second. The Frequency Converter supplies 48 cycle, 3-phase alternating current so that by merely throwing a switch, a 24-frame retake may be made without any change in setup and without losing any time. Such 24-frame retakes are made on those scenes which cannot be speed reduced from 30 to 24 frames in the Print Down process for residuals.
 
 
Fig. A-349. Operator's side of the Todd-AO Variable Speed Motor attached to the Camera Adaptor Door.
The combination cable set shown connects the camera to the power line through the buckle trip switch which is mounted in the Adaptor Door.


Todd-AO Variable Speed Motor (Cat. #10)

Camera Adaptor Door (Cat. #09)
 
 
Fig. A-270. Todd-AO High Torque Synchronous Camera Motor. It operates on 230 volt, 3-phase alternating current.

Todd-AO High Torque Synchronous Camera Motor (Cat. #08)
 
 
Fig. A-269. Rear view of the Todd-AO High Torque Synchronous Camera Motor.

Todd-AO High Torque Synchronous Camera Motor (Cat. #08)
 
 
Fig. A-389. The Todd-AO Soft Start Camera Motor Control Box.

Todd-AO Soft Start Camera Motor Control Box (Cat. #30)
 
 
Fig. A-388. The Todd-AO Soft Start Camera Motor Control Box showing the camera cable and simple operator's on-off cord switch.

Todd-AO Soft Start Camera Motor Control Box
(Cat. #30)
 
 
Fig. A-386. Interior view of the Todd-AO Soft Start Camera Motor Control Box showing the positive action mechanism. This Control Box will operate in any position. Large, self-wiping silver contacts, shown at the right are operated from the adjustable cams on the timing shaft. A soft humming noise is produced by the unit until the camera is up to speed, at which time this tone stops automatically giving the operator an indication that his camera is at speed.

Todd-AO Soft Start Camera Motor Control Box
(Cat. #30)

 
 

Todd-AO Hydraulic Camera Tripod

 
Fig. A-212. Todd-AO Hydraulic Camera Tripod shown in its lowest position and with its clamping jacks retracted for moving.

Todd-AO Hydraulic Camera Tripod (Cat. #23)

The Todd-AO Hydraulic Camera Tripod provides an exceptionally stable platform for the Todd-AO Cameras while being instantly adjustable for height and level anywhere from 21 inches to 60 inches above the ground. Dynamic analysis of existing units on the market showed several very basic weaknesses, among which was a great lack of torsional stiffness, which permitted the camera to shake or twist even in a slight wind. The Todd-AO Modifications provide stiffness in the tripod legs at the top where it is needed, and the specially designed wide base clamp block assembly at the top of each leg permits a quarter turn of the locking lever to firmly secure the tripod in position.
 
 
Fig. A-219. Todd-AO Hydraulic Camera Tripod shown in its fully extended position with the three clamping jacks lowered, taking the weight off the wheels.

Todd-AO Hydraulic Camera Tripod (Cat. #23)

The machining tolerances have been held so closely that even without tightening the clamping blocks there is only barely perceptible rotation of the tripod head.

Full-caster rubber-tired wheels permit easily moving the tripod with the camera in place, and three clamping jacks then screw down, firmly anchoring the unit.
 
 
Fig. A-216. Close-up of the top of the Todd-AO Hydraulic Camera Tripod showing the clamping blocks at the head of each leg strut.
 
 
Fig. A-214. Close-up of the head casting of the Todd-AO Hydraulic Camera Tripod. Two of the head clamping blocks are in place and the third has been removed to show the machined surfaces of the clamping block bosses.

Todd-AO Hydraulic Camera Tripod (Cat. #23)
 
 
Fig. A-208. Hydraulic tripod leg strut before being modified. Notice that the right-hand end is the small diameter end and this was at the top of the strut.
 
 
Fig. A-222. Todd-AO Hydraulic Camera Tripod leg strut. Note the wide top trunnion and the large diameter top section of the telescoping strut.

Todd-AO Hydraulic Camera Tripod (Cat. #23)
 
 
Fig. A-221. Comparison of the leg strut assembly in exploded view of the Todd-AO Hydraulic Camera Tripod and the old, simple cast trunnion which it replaces. Note the clamp and spacer cylinder construction which permits rigid tightening of the locking bolt without springing of the clamping bosses on the head casting.

Todd-AO Hydraulic Camera Tripod (Cat. #23)
 
 
Fig. A-291. Standard Mitchell tripod shown mounted on a leg spider or tripod banjo which prevents slipping.

Standard Mitchell Tripod (Cat. #25)
 
 
Fig. A-287. Standard Mitchell Baby Tripod shown mounted on a leg spider or banjo.

Standard Mitchell Baby Tripod (Cat. #26)
 
 
Fig. A-292. Standard Mitchell High Hat shown placed on a tripod banjo only for comparison. The High Hat is a one-piece casting.

Standard Mitchell High Hat (Cat. #27)
 
 
   
Go: back - top - back issues - news index
Updated 22-12-16