“Almost like a real web site”
 

IN7OMM.COM
Search | Contact
News | e-News
Rumour Mill | Stories
Foreign Language
Auf Deutsch

WHAT'S ON IN 7OMM?

7OMM FESTIVAL
Karlsruhe | Gentofte
Krnov | Varnsdorf
Banská Bystrica
Oslo | Bradford

TODD-AO PROCESS
Films | Premiere
People | Equipment
Library | Cinemas
Distortion Correcting
DP70 / AAII Projector
 

VISION, SCOPE & RAMA
1926 Natural Vision
1929 Grandeur
1930 Magnifilm
1930 Realife
1930 Vitascope
1952 Cinerama
1953 CinemaScope
1953 Panavison
1954 VistaVision
1955 Todd-AO
1955 Circle Vision 360
1956 CinemaScope 55
1957 Ultra Panavision 70
1958 Cinemiracle
1958 Kinopanorama
1959 Super Panavision 70
1959 Super Technirama 70
1960 Smell-O-Vision
1961 Sovscope 70
1962
Cinerama 360
1962 MCS-70
1963 70mm Blow Up
1963 Circarama
1963 Circlorama
1966 Dimension 150
1966
Stereo-70
1967 DEFA 70
1967 Pik-A-Movie
1970 IMAX / Omnimax
1974 Cinema 180
1974 SENSURROUND
1976 Dolby Stereo
1984 Showscan
1984 Swissorama
1986 iWERKS
1989 ARRI 765
1990 CDS
1994 DTS / Datasat
2001 Super Dimension 70
2018 Magellan 65

Various Large format | 70mm to 3-strip | 3-strip to 70mm | Specialty Large Format | Special Effects in 65mm | ARC-120 | Early Large Format
7OMM Premiere in Chronological Order

7OMM ON EARTH

Australia | Brazil | Canada | China | Denmark | England | France | Germany | Holland | India | Iran | Israel | Ireland | Mexico | Norway | Poland |  Russia | Spain | Sweden | Turkey | USA |

LIBRARY
7OMM Projectors
People | Eulogy
65mm/70mm Workshop
The 7OMM Newsletter
Back issue | PDF
Academy of the WSW

7OMM NEWS
• 2026 | 2025 | 2024
2023 | 2022 | 2021
2020 | 2019 | 2018
2017 | 2016 | 2015
2014 | 2013 | 2012
2011 | 2010 | 2009
2008 | 2007 | 2006
2005 | 2004 | 2003
2002 | 2001 | 2000
1999 | 1998 | 1997
1996 | 1995 | 1994
 

in70mm.com Mission:
• To record the history of the large format movies and the 70mm cinemas as remembered by the people who worked with the films. Both during making and during running the films in projection rooms and as the audience, looking at the curved screen.
in70mm.com, a unique internet based magazine, with articles about 70mm cinemas, 70mm people, 70mm films, 70mm sound, 70mm film credits, 70mm history and 70mm technology. Readers and fans of 70mm are always welcome to contribute.

Disclaimer | Updates
Support us | Staff
Testimonials
Table of Content
 

 
 
Extracts and longer parts of in70mm.com may be reprinted with the written permission from the editor.
Copyright © 1800 - 2070. All rights reserved.

Visit biografmuseet.dk about Danish cinemas

 

Todd-AO Distortion Correcting Printing Process

This article first appeared in
..in 70mm
The 70mm Newsletter

Written by: Grant Lobban, England Issue 42 - December 1995

The diagram shows why a distortion correcting process, one of the features of the Todd-AO system, was felt to be required. This printing method will counter balance the distortion inherent in projection on a deeply curved screen from steep projection angles. 1A, 1B, 2A and 2B indicate portions of the image striking the four corners of the screen. The lines at bottom must travel further and will therefore spread more than the lines at the top, causing the familiar keystone distortion. Observing line 3 will show that this distortion is even further compounded by the fact that portions of the image striking the center of the screen will always hit lover than portions striking the edge. By means of simple test patterns, an accompanying diagram show how this distortion looks on the screen and how the Todd-AO people plan to correct it.

The distortion-correcting printing process was initially meant to be an integrated part of the Todd-AO system. It was originally designed to eliminate three types of distortion, keystone distortion, distortion resulting from using a deeply- curved screen, plus correcting the distortion arising from use of the extremely wide-angle lenses, in both photography and projection.

 

Further in 70mm reading:

Part 2: Description of Todd-AO Mark III Printer Principle

Part 3: "Oklahoma!" Printing Operation in the Todd-AO Mark III Printer 

Who is Grant Lobban?

The Todd-AO Saga

Internet link:


 

Distorted Screen Image. The drawing shows how straight horizontal and vertical lines are distorted by keystone and screen curvature.

Two classes of print were to be produced, one to cover projection angles from 10 to 15 degrees and another for even higher angles. In theory, it was an workable idea, but each type of print was required to cover a range of circumstances. For a perfect system, it would really need to be infinitely variable, producing a print exactly matching each individual theatre. Also, if it was intended to counter-balance the effect of the wide-angle lenses, this part of the correction process would have to be made "switch able", in or out, as the "bug- eyed" lenses were normally only used occasionally throughout the early Todd-AO productions.
 
 
Distortion-Correcting Print. Distorting a print in processing so that vertical and horizontal lines would take the shape shown in the film strip at center could counter balance this distortion and provide straight lines on the screen shown at bottom even though that screen be curved. These diagrams are not meant to be an exact description of the Todd-AO corrective printing process. Their purpose is to explain in simple language how it works. In addition to the two types of distortion mentioned above, the Todd-AO method also corrects a print for distortion caused by the use of extreme wide-angle lenses in photography.

The reason for developing this special printing method was largely financial. After his experiences with the high cost of installing Cinerama, part of Michael Todd's brief to the American Optical Company was to avoid the need for major structural alterations and loss of seating, by using a theatres normal projection room, even if this was in its traditional position high up at back of the balcony.
 
 
Corrected Screen Image

The American Optical Company continued to pursue the idea, right up to the opening of "Oklahoma!". However, the use of an unsuitable print at the premiere did spoil the screen image, judging by these extracts from contemporary reviews from the New York papers.

In fact, further development was abandoned and future Todd-AO installations followed the same pattern of having a new lower projection room constructed, if the rake at the chosen theatre was too steep.

It must be remembered that, at the beginning, Todd-AO was regarded as just another process, one among the many system which was constantly being announced. It was the commercial success of "Oklahoma!", followed up by the even greater hits, "Around the World in 80 Days" and "South Pacific" which lead to Todd-AO's acceptance and 70mm projection becoming the cinemas premiere presentation process.
 
 

Reviews

 
"......Fortunately, the movie is true to the original.....and Todd-AO takes the moviegoer out of his cramped theatre seat and into rolling farmland......The effect is not completely three-dimensional, but there is a good illusion of depth.....The figures on the screen are tremendous, and the close-ups are so sharp in detail that the texture of skin and clothing, the sheen of a girls hair, are almost real to touch. The colours are vivid, and the movie has many striking landscapes......But Todd-AO is best in close-ups."

TRIBUNE, William K. Zinsser:
 
 
""Oklahoma!" seems likely to become as much a box office milestone in movies as it was in stage annals. The glamour of the title and music should keep the picture in the newly refurbished Rivoli for months......News about Todd-AO is less cheery......Level settings run downhill toward the edge of the screen, an effect that is particularly disconcerting in dance numbers."

WORLD TELEGRAM, Altan Cook
 
 
The Todd-AO corrective printing process.

This mixed reaction from film critics, together with the general disappointment with the screen image from the first Todd-AO print shown to the public, prompted this report, which appeared in the International Projectionist magazine:

"What puzzled some observers was that the picture shown at the
Rivoli Theatre had a great many white scratches and distorted horizontal lines. Another print shown privately on the West Coast sometimes earlier was unscratched an nobody had reported distortion. The difference between the New York showing and the earlier test in Hollywood is attributed to the failure of the American Optical Company to produce a good distortion-corrected print in time for the opening. The AO factory in Southbridge, Mass., was badly damaged by flood in August and could not bring the final model of its newly designed printer into use quickly enough. The opening date at the Rivoli could not be postponed. The print used for the premiere, according to Todd-AO president Henry Woodbridge, was a trial product of a crude early version of the printer. It was never meant for exhibition to the public.

Since the opening, projection methods at the Rivoli have been changed. Instead of using the theatres regular projection room in the rear of the theatre, which has a very steep angle of throw, an additional booth, built in front of the mezzanine, was put into use. This booth has little or no projection angle, so the corrective print was not required. A contact print, similar to the one shown earlier in Hollywood, was used, and a much better picture resulted. The corrective printing process, developed by Dr O`Brien of the American Optical Company, has not really been tested publicly. This will have to wait until the Company delivers a perfected product"
 
 
 
Go: back - top - back issues
Updated 28-07-24